Jointlocker 2.0

Jointlocker 2.0

Skip to product information
$ 2400

Jointlocker 2.0

Jointlocker 2.0

With an updated lighter fit, and 28% less material, The Jointlocker 2.0 is built for maximizing your smoking pleasure. Easily store your BIC lighter and joint, then twist on the cap for safe keeping! It’s the thing you never knew you needed until now.
Color: Magenta

Product Details

  • Designed and 3D printed with plant-based plastics in The USA
  • Fits 1 standard-sized BIC lighter 
  • Fits 1 joint that uses a standard rolling paper
  • 3.6" Height x 1.75" Width x 0.82" Depth (with cap)
  • All Jointlocker 2.0 caps can be mixed (will not fit the Jointlocker 1.0)
  • Available for wholesale. Email us for pricing

Care Instructions

  • Please remove all labels, stickers, wraps, etc. from the BIC lighter before inserting into the Jointlocker. Thank you.
  • Easily clean your Jointlocker with hot water, a smidge of soap, and a Q-tip!
  • Another Way (our favourite method) to pull the BIC lighter out of the Jointlocker, is put your thumbnail under the red pushy thing, then begin pulling upwards.
  • If you have any questions, concerns, hopes, fears, or dreams please email hi@anotherroom.io and Shafeez or Chloe will be in touch with you asap.
View full details

DESIGNED
AND 3D PRINTED IN THE USA

MADE FROM pLANT-BASED PLASTICS

LOW-WASTE MANUFACTURING PROCESS

3D printed by humans and robots

HOW A FEW SMALL DETAILS MAKE ALL THE DIFFERENCE.

From how your BIC lighter is held in place, to adapting the bottom surface, we made a few small tweaks to the design — improving our overall rejection rate which means less waste, YAY!

STICK YOUR BIC … IN OUR UPDATED LIGHTER SPOT

Meet The Grip Fins! A design feature that updated the lighter fit. Learn more about why we added grip fins here.

Part storage, part case, this spot was designed to fit your BIC, and give you the ability to light your joint without ever having to remove the lighter. For the best experience, please remove all labels, stickers, wraps, etc. from the BIC lighter before inserting into the Jointlocker.

A SLOT FOR YOUR POT

This spot perfectly fits a joint that uses a standard-sized rolling paper or a 1 ¼” rolling paper. And, if you roll mini cone joints like Shafeez (without a filter), you can fit quite a few in there.

TWIST IT, GRAB IT, SPIN IT, SMOKE IT, TWIST IT

A crucial element to ensure joints don’t end up squashed in pockets, or worse, lost and gone forever. Great for storing fresh joints, and the partially-smoked ones too! Like most things, the cap will get smoother with time. Please note that the Jointlocker 2.0 cap will not fit on the Jointlocker 1.0.

THE INSIDE SCOOP ON THE INSIDE SCOOP

This design update allowed us to reduce our rejection rate, and decrease our material usage by 28%. PLUS, if you’re touchy feely, people like us, you’ll enjoy the sensory experience of the bottom. It feels nice. Learn more about why we made this update.

BUILT FOR SMOKING WEED + DOING STUFF

Easily fits in pockets, packs, purses, and palms! Great for storing fresh joints, and the partially–smoked ones too!

amazing files/jl-v2-top-left-large.jpg
files/grid-3-time_b6c8121d-705e-47c0-b2a7-2350eb872906.jpg
clock

5min away from 4:20 lol

plastic flower

3D printed with
plant-based plastics
in the USA

cake

Did you know

The jointlocker is made from 453 layers of PLA filament

files/jl-v2-top-right-small.jpg
amazing
Star Copy 5@4x Star Copy 5@4x Star Copy 5@4x Star Copy 5@4x Star Copy 5@4x

It’s the thing you’ve always needed, and literally nothing is going to hug and hold you BIC and joint like the Jointlocker does.

files/jl-v2-bottom-right-large.jpg
Star Copy 5@4x Star Copy 5@4x Star Copy 5@4x Star Copy 5@4x

I can’t believe The Jointlocker isn’t butter.  How did I get high for so long without this magical contraption.

want files/grid-10-ondesk_9784b918-68b6-448d-b3a6-3124e63763f1.jpg

Dive into our world of 3D printing.

Curious about plant–based plastic? Keen to know why we’re 3D printing instead of injection moulding? Unsure what a grip fin is? Have no idea what any of that means?

The many layers of why we love 3d Printing

From prototyping and iterating, to low–waste production, and making our products in...

WHAT GRIP FINS ARE AND HOW IT LED TO THE JOINTLOCKER 2.0

During the Jointlocker 1.0 production run, we learned that all BIC lighters are different in size...

How the bottom scoop helped us scale the jointlocker

Get the inside scoop on one of the most important updates to date...

What's New?

Since we can’t run ads, this copy is written strictly for SEO purposes. A basic tray for your things, a corduroy lighter/joint holder, a cone shaped object for help with rolling joints, and another lighter/joint holder in 6+ colours.